Garbage Disposal Repair & Installation | Broward & Palm Beach
    Plumbing SFL
    Book Now
    FIXTURE SERVICE • BROWARD & PALM BEACH

    Garbage Disposal Repair & Installation

    From a humming jam to a full replacement — disposal diagnosis, repair, and installation across South Florida with upfront flat-rate pricing.

    Upfront Pricing•Open 24/7•400+ 5-Star Google Reviews

    Financing available through Wisetack, Klarna and PayPal Pay Later.

    1. How a Garbage Disposal Works

    Understanding the mechanism explains most disposal problems — and most are simpler than they seem.

    A garbage disposal doesn't have sharp blades. It uses a spinning grinding plate (impeller) that flings food waste against a stationary grind ring, shredding it into small particles that wash down the drain with running water. The motor spins the plate; a flywheel key jams if a hard object lodges between plate and ring.

    This design means most 'broken' disposals are actually jammed — and the fix is often a simple clearing, not a replacement.

    2. Common Disposal Problems & Causes

    Disposal issues fall into a few recognizable categories, each with a different fix.

    Identifying which category your symptom falls into determines whether you need a clearing, a repair, or a replacement.

    • Hum but doesn't spin: jammed grinding plate — often clearable.
    • No sound at all: tripped overload protector, no power, or failed motor.
    • Leaks from the bottom: failed internal seal — usually means replacement.
    • Leaks at the sink: mounting assembly or plumbers' putty issue — repairable.
    • Runs but drains slowly: downstream branch clog, not a disposal problem.

    3. Humming vs. Jammed: Two Different Problems

    A humming disposal and a silent disposal point to different causes — and different fixes.

    A humming disposal means the motor is receiving power but can't spin — the plate is jammed by a hard object. After confirming the power is off at the switch, the jam can often be cleared by turning the Allen wrench socket at the bottom of the unit. If that frees the plate and the disposal runs, the fix is complete.

    A completely silent disposal (no hum) means no power is reaching the motor — either the overload protector has tripped (a small red reset button on the bottom), the breaker has tripped, or the motor has failed. The reset button is the first check; if it trips repeatedly, the motor is likely failing and replacement is the call.

    Always Cut Power Before Reaching In

    Never put your hand into a disposal to clear a jam without first turning off the power at the switch and confirming it's off. Use tongs or pliers for any object, and the Allen wrench for the plate.

    4. Repair vs. Replace the Disposal

    The decision depends on whether the issue is mechanical (clearable) or the motor/body (replacement).

    A jam, a tripped overload, a mounting leak, or a worn splash guard are all repairable on a sound disposal. These are quick, economical fixes that extend the unit's life.

    Replacement becomes the smarter call when the motor has burned out (humming that won't clear, repeated overload trips), the internal seals have failed and the unit leaks from the body, or the disposal is old enough that another failure is likely soon. Disposals are relatively affordable, so a failed motor usually justifies replacement over repair.

    5. Installation Considerations

    A proper disposal installation involves plumbing and electrical work — both must be done correctly.

    Beyond mounting the new unit, a complete installation includes inspecting the mounting assembly and sink flange (the source of most disposal leaks), verifying the dishwasher drain connection if present, ensuring the electrical cord and connection are sound, and checking that the drain plumbing flows freely.

    These steps separate a lasting installation from one that leaks or trips breakers within months. We handle them on every job.

    6. Proper Use & What Not to Grind

    How you use the disposal affects how long it lasts — and whether your drain stays clear.

    Run cold water before, during, and after grinding to flush particles through the line. Hot water can melt fats, which then re-solidify further down the pipe. Always let the disposal run a few seconds after the grinding stops to clear the line.

    Avoid grinding fibrous, starchy, or hard items that jam the plate or build up in the drain.

    • Avoid: grease, oil, and fat (they solidify in the drain).
    • Avoid: eggshells, coffee grounds, and pasta/rice (starchy swelling and grit buildup).
    • Avoid: bones, fruit pits, and utensils (jam the plate).
    • Avoid: fibrous produce like celery and onion skins (tangle the impeller).

    Disposal Service Options

    Clear the jam for a sound unit, replace when the motor or body has failed.

    FIX THE UNIT

    Jam Clearing & Component Repair

    Diagnosis and clearing of a jammed grinding plate, reset of the overload protector, and inspection of the mounting assembly and splash guard — restoring function without replacing the disposal.

    When recommended: Ideal when the disposal is relatively new and the issue is a jam, a tripped overload, or a serviceable component.

    Check Repair Pricing
    REPLACE THE UNIT

    New Disposal Installation

    Removal of the old disposal, mounting assembly and plumbing connection inspection, electrical hookup, and installation of a new unit — including customer-supplied or Plumbing SFL-sourced disposals.

    When recommended: Best when the motor has burned out, the body is leaking, or the unit is old enough that repair isn't economical.

    Check Installation Pricing

    The Plumbing SFL Disposal Standard

    Proper diagnosis, safe electrical handling, clean plumbing connections.

    Jam vs. Motor Diagnosis

    We distinguish a jammed plate (clearable) from a burned-out motor (replacement) before recommending a path.

    Mounting & Seal Inspection

    On every install we inspect the mounting assembly and sink flange — the source of most disposal leaks.

    Safe Electrical Connection

    Proper cord connection and overload-protector verification so the unit is safe and resettable.

    VIP MEMBERSHIP

    Save on Service & Diagnostics

    VIP members pay no service call fee and get 10% off all work. $299 a year, no auto-renew.

    View VIP Benefits
    FINANCING AVAILABLE

    Flexible Payment Options

    Financing available through Wisetack, Klarna and PayPal Pay Later.

    How Pricing Works
    SOUTH FLORIDA PLUMBING KNOWLEDGE

    Frequently Asked Questions

    Clear answers about pricing, service, warranties, and South Florida plumbing standards.

    A humming disposal means power is reaching the motor but the grinding plate is jammed — usually by a hard object (bone, utensil, fruit pit) lodged between the plate and the wall. After confirming power is off, the jam can often be cleared with an Allen wrench at the bottom socket. If that doesn't resolve it, a service call diagnoses whether the motor itself has failed.

    VIP Membership

    VIP members pay no service call fee and get 10% off. $299 a year, no auto-renew.

    Learn About VIP ($299/yr) →

    Financing Options

    Financing available through Wisetack, Klarna and PayPal Pay Later.

    See Pricing & Payment Options →
    HOW CAN WE HELP?

    Get Started

    Two simple ways to get started.

    Book NOW

    You know what you need. See the price and pick a time online.

    BOOK NOW

    Call or Text

    Talk to a plumbing professional, or text us photos of the problem.

    CALL OR TEXT 561-872-2363

    Call or text 561-872-2363. We answer 24/7.

    Financing available through Wisetack, Klarna and PayPal Pay Later.

    PLUMBING SFL • BROWARD & PALM BEACH

    SHOW UP.FIX IT RIGHT.LEAVE IT CLEAN.

    Ready for honest, professional plumbing in Broward & Palm Beach? Book online or call or text 561-872-2363.

    BOOK NOWCALL OR TEXT 561-872-2363

    Financing available through Wisetack, Klarna and PayPal Pay Later.

    Call or text 561-872-2363•
    400+ 5-Star Reviews
    •
    Licensed & Insured