Plumbing Leak Detection & Repair | Broward & Palm Beach County
    Plumbing SFL
    Book Now
    DIAGNOSTIC SERVICE • BROWARD & PALM BEACH

    Plumbing Leak Detection & Repair

    From unexplained water bills to warm floor spots and damp drywall — electronic leak detection pinpoints the source without exploratory demolition across South Florida.

    Upfront Pricing•Open 24/7•400+ 5-Star Google Reviews

    Financing available through Wisetack, Klarna and PayPal Pay Later.

    1. The Hidden-Leak Reality in SFL Homes

    Not every leak announces itself with a visible puddle. Many of the most damaging leaks happen out of sight — and silently.

    A pinhole leak in a copper supply line behind drywall, or a crack in a sub-slab pipe, can run for weeks or months before it's visible — by which point the water bill, the drywall, or the foundation has already suffered damage.

    South Florida's combination of older housing stock (pre-1975 copper and galvanized supply lines), hard water, and high municipal pressure creates conditions where hidden leaks are relatively common. Electronic detection exists precisely because these leaks can't be found by eye.

    2. Signs You Have an Undetected Leak

    Hidden leaks leave evidence — if you know what to look for.

    Any one of these signs warrants a detection visit. The longer a hidden leak runs, the more structural and mold damage accumulates.

    • Unexplained spike in the water bill with no change in usage.
    • Sound of running or hissing water when no fixture is in use.
    • Warm spot on the floor (often a hot-water slab leak).
    • Damp, discolored, or bulging drywall or ceiling.
    • Persistent musty or moldy odor with no visible source.
    • Cracks in walls or flooring that appear without obvious cause.

    Shut Off the Main If You See Active Flow

    If water is visibly flowing or rapidly spreading, shut off the main water valve and turn off electricity to affected outlets before calling 561-872-2363.

    3. Electronic Leak Detection Methods

    Modern leak detection is non-invasive — we listen, image, and pressurize rather than cut and hope.

    Acoustic listening devices amplify the hiss of pressurized water escaping a pipe, letting us trace the sound to its source through drywall, cabinetry, and slab. Thermal imaging reveals temperature differences — a warm floor spot often marks a hot-water leak beneath.

    Pressure testing isolates which section of pipe is losing pressure, narrowing the search before the precise acoustic or thermal location. Used together, these methods pinpoint a leak's location without exploratory demolition.

    4. Slab Leaks vs. In-Wall Leaks

    Where the leak lives determines the repair approach — but both start with the same detection.

    An in-wall leak — typically in copper supply lines feeding a shower valve or running to a second floor — is usually accessed through a targeted drywall opening, repaired, and the wall closed up. These are among the most common hidden leaks.

    A slab leak runs beneath the concrete foundation. Depending on location and condition, the repair may be a targeted slab access, or — often the better long-term choice — rerouting the affected line overhead through the attic to avoid future sub-slab failures. Slab leak repair has its own dedicated page with deeper detail.

    5. From Detection to Repair Plan

    Detection is the diagnostic step; the repair plan follows from what we find.

    Once the leak is located and its type confirmed, we present the least-invasive repair option with upfront flat-rate pricing. For a simple pinhole in accessible copper, that may be a targeted section replacement. For a slab leak, it may be a reroute. For a failing supply line, it may point toward a broader repipe.

    The key is that no repair begins until you've reviewed the location, the recommended approach, and the exact price. Detection informs the plan; the plan informs your decision.

    6. Leak Prevention & Early Warning

    The best leak is the one that never happens — or the one you catch in hours, not months.

    Excessive water pressure is a leading contributor to premature pinhole formation; a pressure regulator test can catch this before it causes leaks. Aging supply lines in pre-1975 homes are a known risk factor that a repipe addresses permanently.

    For whole-home protection, an automatic shutoff system (like Flo by Moen) monitors flow and can shut off the water automatically when a leak is detected — turning a catastrophic flood into a minor incident. We install these as a proactive safeguard.

    Leak Detection & Repair Options

    Locate the source first, then present the least-invasive repair path.

    FIND THE SOURCE

    Electronic Leak Detection Visit

    Acoustic listening, thermal imaging, and pressure testing to pinpoint a hidden leak's exact location — behind walls, under slabs, or underground — without exploratory demolition.

    When recommended: The right first step for any unexplained water bill spike, warm floor spot, damp drywall, or sound of running water with nothing in use.

    CALL OR TEXT 561-872-2363
    FIX THE SOURCE

    Targeted Leak Repair

    Once located, we present the least-invasive repair option — a targeted access cut, a pipe reroute around a slab leak, or a section replacement — with upfront flat-rate pricing.

    When recommended: After detection confirms the leak's location and type, this is the authorized repair to resolve it permanently.

    Check Repair Options

    The Plumbing SFL Leak Detection Standard

    Non-invasive location first — demolition only during the authorized repair.

    Non-Invasive Location

    Acoustic and thermal detection finds the leak before any wall or floor is opened — no exploratory demolition.

    Multi-Method Confirmation

    We combine listening, imaging, and pressure testing to confirm the source rather than relying on a single tool.

    Least-Invasive Repair Path

    Where possible, rerouting or targeted access avoids opening large sections of wall or slab.

    VIP MEMBERSHIP

    Save on Service & Diagnostics

    VIP members pay no service call fee and get 10% off all work. $299 a year, no auto-renew.

    View VIP Benefits
    FINANCING AVAILABLE

    Flexible Payment Options

    Financing available through Wisetack, Klarna and PayPal Pay Later.

    How Pricing Works
    SOUTH FLORIDA PLUMBING KNOWLEDGE

    Frequently Asked Questions

    Clear answers about pricing, service, warranties, and South Florida plumbing standards.

    Common signs include an unexplained spike in your water bill, the sound of running water when nothing is in use, warm spots on the floor (a hot-water slab leak), damp or discolored drywall, or a persistent musty/moldy odor. If you notice any of these, a leak-detection visit can confirm and locate the source.

    VIP Membership

    VIP members pay no service call fee and get 10% off. $299 a year, no auto-renew.

    Learn About VIP ($299/yr) →

    Financing Options

    Financing available through Wisetack, Klarna and PayPal Pay Later.

    See Pricing & Payment Options →
    HOW CAN WE HELP?

    Get Started

    Two simple ways to get started.

    Book NOW

    You know what you need. See the price and pick a time online.

    BOOK NOW

    Call or Text

    Talk to a plumbing professional, or text us photos of the problem.

    CALL OR TEXT 561-872-2363

    Call or text 561-872-2363. We answer 24/7.

    Financing available through Wisetack, Klarna and PayPal Pay Later.

    PLUMBING SFL • BROWARD & PALM BEACH

    SHOW UP.FIX IT RIGHT.LEAVE IT CLEAN.

    Ready for honest, professional plumbing in Broward & Palm Beach? Book online or call or text 561-872-2363.

    BOOK NOWCALL OR TEXT 561-872-2363

    Financing available through Wisetack, Klarna and PayPal Pay Later.

    Call or text 561-872-2363•
    400+ 5-Star Reviews
    •
    Licensed & Insured